Epoxy floor coating is durable and used for a variety of purposes. This flooring is often used in sunrooms, garages, warehouses, and high-traffic halls and walkways. Because it is so durable, an epoxy floor surface works well in areas of a workshop where heavy machinery is used.

If you know what you’re doing, epoxy flooring is very easy to take care of. This post will show you how to clean and take care of epoxy floors. We will also talk about how to keep epoxy floors in good shape.

Maintenance Plan

When it comes to cleaning and maintaining epoxy flooring daily, not much work is needed. Even though they don’t take much time, you should sweep and mop the floor every day as part of your cleaning routine. Remove any little debris from the floor to avoid wear and tear.

1. Daily Clean Up

If your business uses chemicals that are harmful or corrosive, it is very important to clean up any spills as soon as possible. If you don’t clean up spilled chemicals right away, they might cause permanent damage to the flooring.

2. Weekly Clean Up

The epoxy coating will have a clean, smooth surface if the floor is scrubbed well once a week. Depending on how often people walk on your floor, you may need to clean it every two weeks. Don’t use brushes with hard bristles because they will damage your floors.

3. Yearly Maintenance

Despite being exceedingly durable, this flooring may have surface issues. Look for big stains, scratches, cuts, and gouges in the coating.

The best way to deal with these issues is not to ignore them, but to deal with them as soon as they come up. If you don’t know how to deal with the stain, scratch, or cut, talk to the person who installed the floor to find out what to do.

Let’s Plan your project
Epoxy Floors - An Easy Maintenance Guide

What is the Best Way to Clean up an Epoxy Floor?

For epoxy floors, the best way to clean them is with watered-down ammonia. You only need to mix two to three ounces of ammonia with one gallon of warm water. Then, you can use a microfiber floor mop to apply the solution to your epoxy floors. If you can, avoid using natural-fiber mops, as some of the fibers may become embedded in the epoxy coating.

The surface of your epoxy floors must never have any sand or dust on it. This is especially important if cars or other heavy machines are used on the floor. This is important because any dirt or grit that stays on the floor can get stuck in the epoxy or damage its surface. Because the floor can get worn down, you should do this task often. Even though epoxy floors are very durable, they can still get scratched over time.

The best way to clean is with a vacuum cleaner that has strong suction and a bristle brush attachment. This can be done every day or once a week, depending on how often dirt or dust gets on the floor.

1. Spot Cleaning

If you spilled liquid on your epoxy floor, you need to clean it up as soon as possible. Most of the time, this will only affect a small part of the floor, which is easy to clean with a vacuum cleaner that has strong suction. The vacuum will also get rid of any dirt that may be there.

After that, get the microfiber floor mop and some warm water to clean the dirty area. Epoxy surfaces are water resistant and easy to clean if liquids do get on them for whatever reason.

2. Heavy-Dust and Epoxy Floors

If there is too much dirt on your epoxy floor, we suggest this method:

  1. Take anything off the floor that might make it harder to clean it well.
  2. First, use a brush to get rid of any extra debris, and then vacuum the floor well.
  3. Then, get a mop with thick foam and warm water and use it to remove all the dirt that has built up in the area.
  4. Lastly, use two to three ounces of ammonia mixed with one gallon of warm water and a microfiber mop to clean the floor.

3. Stains

If you see rust stains, scrub the area gently with warm water, a soft deck brush, or a kitchen scouring sponge. If you see rust or other stains on your surface. Don’t ever use harsh chemicals or steel wool because they are both very rough.

You shouldn’t use vinegar or cleaning products with acid or citrus in them. Using these products can cause the epoxy catalyst to fail, which will damage your floor.

4. Gasoline, Motor Oil, and Other Chemicals

How do you clean epoxy garage floors? Spills of motor oil, antifreeze, or gasoline on an epoxy floor must be cleaned up quickly. Get some paper towels or shop rags and start cleaning up the mess as soon as you can.

Car chemicals can be harmful to your health and destroy your epoxy floor. Other chemicals, such as those used to clean and paint, must be wiped up quickly to protect the epoxy floors. Paper or rags from the shop can be used.

get a quote now
Epoxy Floors - An Easy Maintenance Guide

How to Get Tire Marks Off an Epoxy Garage Floor

  1. To get rid of the tire marks on the concrete epoxy floor, use a cleaner for concrete epoxy floors and soak the affected area well.
  2. After putting on the cleaning, wait a few minutes before sweeping it up.
  3. Scrub the area gently with a brush that has particularly firm nylon bristles.
  4. The longer you wait to get rid of the tire marks, the harder it will be. So you should do everything you can to do it as soon as possible.
  5. If you plan to keep your car in the garage for a while, protect the tire with cardboard or wood. This will make sure that the epoxy coating doesn’t get damaged.

Install Walk-off Mats

Using a walk-off mat at the garage door will catch dirt and dust brought in on people’s shoes. During the colder months, you might want to think about using a long walk-off mat. During the colder seasons, you might want to use a long walk-off mat.

Cleaners that Can Damage your Epoxy Garage Floor

How do you clean a garage Epoxy floor? If you want to clean an epoxy garage floor, you shouldn’t use cleaners that have vinegar or citrus in them.

You shouldn’t use a lot of different cleaners on epoxy-coated floors. Many cleaners have chemicals that are too harsh for floors made of resin.

Common epoxy floor cleaners and additives to avoid include:

  • Citric acid
  • Bleach
  • Most soap-based cleaners
  • Vinegar

All of these cleaners have acid in them, which breaks down the epoxy catalyst and removes the shiny top layer. Your floor will get damaged over time because of these. If your garage floor gets a lot of use, you should deep clean it at least once every three to four months.

If you want to use heavy chemicals, it’s always best to water them down. Try not to use bleach or other strong chemicals if you can. A little bit of warm water is the best way to clean.

When to Give an Epoxy Floor a New Coat?

Before you decide to re-coat your floors, you should give them a thorough inspection. Metallic epoxy floors don’t always need to be re-coated or ground down to the concrete or covered with a new coating.

Checking for the following is the best way to tell if it’s time to recoat your floors:

  • Peeling
  • Bubbling
  • Getting away from the ground
  • Excessive Layer
  • Unevenness

You can do the process of recoating by yourself if you want to. Depending on the size of your space, though, it may be best to let a professional redo the coating. When you want to recoat an epoxy floor system, you have to buff and sand the old coating.

Fill any cracks or holes, clean the floor well and then apply the new coat of epoxy. It’s a technical process that can be hard work, especially for large spaces like warehouses and factories.

Need to Know More About Epoxy Floors? Contact Us

If you’re still not sure how to clean your epoxy floors the best way, contact DIVERSE TECHNOLOGY INDUSTRIAL INC. today! We can help you with how our services can help. We’ve carefully chosen the services we offer and used a trial-and-error method to find the best ways to help you with all of your flooring needs.

Our epoxy floor coating experts can help you keep your floors looking like they’re brand new. We work with a mix of light and heavy-duty tools. Not sure where to start with cleaning and maintenance? We’ll take care of you. Call us at (209) 321-9831